LINES GP-HYDRAULIC 2182133 - Caterpillar

2182133 LINES GP-HYDRAULIC Caterpillar parts 322C, 325C, 325D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2182133
218-2133
2182133

Buy LINES GP-HYDRAULIC 2182133 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Kumho Crugen HT51 All-Season Tire - LT235/75R15 6-ply

$152.00

30 Jun 2022
34.3[15.43] Pounds
US: Tires.Auto

Kumho Crugen HT51 All-Season Tire - LT235/75R15 6-ply
Kumho Stiff center block design reinforce stability, traction and handling capabilities for improved, straight-line driving performance. || Symmetrical four-channel layout and optimal block shape improves tread life. || 3D sipes applications maximize grip and breaking performance which improves stability on snow-covered roads. || Fit type: Vehicle Specific || Load capacity: 1985 pounds

For full view, you need register

Compatible equipment models: 2182133:

EXCAVATOR 322C 325C 325D Caterpillar

Information:

Inject starting aid (ether), only while cranking the engine, or after initial start-up, until the engine is running smoothly.Use sparingly, excessive ether without cranking can cause piston and ring damage.Wait approximately two seconds before injecting again.Use ether for cold starting purposes only.After every 30 seconds of engine cranking, allow two minutes for starting motor to cool before cranking again.Turbocharger damage can result, if the engine rpm is not kept low until the engine oil light/gauge verifies the oil pressure is sufficient.
Illustration 1 g00416833
Turn the battery disconnect switch to the ON position. The battery disconnect switch is inside of the access door on the left side of the machine.
Illustration 2 g00447580
Move the transmission direction control lever to the NEUTRAL position.
Illustration 3 g00447582
Engage the parking brake.
Illustration 4 g00447744
Move the attachment control lever to the HOLD position. Engage the restraint for the attachment controls.
Illustration 5 g00447750
Turn the key start switch to the ON position. The system performs an automatic self test. If the system detects a fault, check the electrical system. Make all of the necessary repairs before you start the engine.
Illustration 6 g00447754
Turn the start switch to the START position. Crank the engine. Release the key when the engine starts.Note: The ether injection system is automatic. Ether injection is controlled by the electronic control module for the engine.After the engine starts, ether can be manually injected by pushing and releasing the top of the rocker switch until the engine is running smoothly. Manual injection is also limited by the electronic control module. See the topic "Ether Starting Aid"in this manual.For starting below -18°C (0°F), the use of the cold weather starting aids is recommended. A fuel heater, a jacket water heater, and extra battery capacity may be required.At temperatures below -23°C (-10°F), consult your Caterpillar dealer. For cold weather starting, see Operation and Maintenance Manual, SEBU5898, "Cold Weather Recommendations".