LINES GP-SWING 2184335 - Caterpillar

2184335 LINES GP-SWING Caterpillar parts 422E, 428E, 432E, 434E, 442E, 444E

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2184335
218-4335
2184335

Buy LINES GP-SWING 2184335 Caterpillar genuine, new aftermarket tractor parts with delivery
BACKHOE LOADER,

Compatible equipment models: 2184335:

BACKHOE LOADER 422E 428E 432E 434E 442E 444E Caterpillar

Number on catalog scheme:

Caterpillar 2184335 Parts scheme LINES GP-SWING

For full view, you need register

Information:

Illustration 24 g00857454
Connect hose (30) on the front of the head. Tighten hose clamp (29). Connect harness assembly (28) .
Illustration 25 g00857453
Install cable straps (27). Connect harness assembly (26) .
Illustration 26 g00857436
Position the harness assembly to the original location. Install the cable straps.
Illustration 27 g00858876
Connect harness assembly (25). Install the cable straps.
Illustration 28 g00857435
Connect harness assemblies (23) and (24) .
Illustration 29 g00857434
Connect harness assembly (21) and install cable straps (22) .
Illustration 30 g00857433
Install base assembly (20) on the engine. Install bolts (19) .
Illustration 31 g00857432
Install tube assembly (18) on the front side of the head.
Illustration 32 g00857430
Install bracket (17) on the engine. Install bolts (16). Connect tube assemblies (14). Install muffler (15). Install bolts (13) and tighten clamp (17A) .
Illustration 33 g00857411
Install positive cable (12) on the air inlet heater. Install cable strap (11) .
Illustration 34 g00857410
Install ground wire (10). Connect harness assembly (7) from the air inlet manifold. Install cable straps (8) and (9) .
Illustration 35 g00857408
Illustration 36 g00857409
Install the tube on the crankcase breather. Install the tube on the valve cover. Tighten hose clamp (6). Tighten hose clamp (5) .
Illustration 37 g00857407
Install air tube (4). Tighten hose clamps (1) and (2). Install bolt (3) .
Fill the cooling system. Refer to Operation and Maintenance Manual, SEBU7299, "Cooling System Level - Check" for the correct procedure.End By:
Install the middle bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Install the engine side guards. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".