2211073 LINES GP-CONNECTING Caterpillar parts
S465
Rating:
Alternative (cross code) number:
CA2211073
221-1073
2211073
CA2211073
221-1073
2211073
SHEAR-STRAIGHT,
Compatible equipment models: 2211073:
Number on catalog scheme:
For full view, you need register
Information:
Assembly Procedure
Table 1
REQUIRED TOOLS
Tool Part Number Part Description Quantity
A 1P-0510 Driver Group 1
B 5P-4756 Spanner Socket 1
Illustration 1 g00442631
Install upper bearing cup (1) into the motor side of auger drive hub (2) with Tooling (A) . Ensure that the bearing cup is seated firmly into the hub.
Illustration 2 g00442632
Install lower bearing cup (3) into the auger drive side of auger drive hub (2) with Tooling (A) . Ensure that the bearing cup is seated firmly into the hub.
Illustration 3 g00442633
Pack lower bearing (4) with 5P-0960 Molybdenum Grease . Install lower bearing (4) and lower seal (5) .
Illustration 4 g00442634
Install shaft (6) .
Illustration 5 g00442635
Pack upper bearing (7) with 5P-0960 Molybdenum Grease . Install upper bearing (7) .
Align the tab on nut lock (8) with the slot on the shaft. Install nut lock (8) .
Illustration 6 g00442636
Use Tooling (B) to install locknut (9) .
Tighten the locknut to a torque of 4.5 N m (40 lb in) .
Rotate the shaft for 5 - 10 revolutions.
Back off the locknut and tighten the locknut to a torque of 4.5 N m (40 lb in) .
Back off the locknut to the tab of the nearest slot.
Bend the tab into the slot.
Table 1
REQUIRED TOOLS
Tool Part Number Part Description Quantity
A 1P-0510 Driver Group 1
B 5P-4756 Spanner Socket 1
Illustration 1 g00442631
Install upper bearing cup (1) into the motor side of auger drive hub (2) with Tooling (A) . Ensure that the bearing cup is seated firmly into the hub.
Illustration 2 g00442632
Install lower bearing cup (3) into the auger drive side of auger drive hub (2) with Tooling (A) . Ensure that the bearing cup is seated firmly into the hub.
Illustration 3 g00442633
Pack lower bearing (4) with 5P-0960 Molybdenum Grease . Install lower bearing (4) and lower seal (5) .
Illustration 4 g00442634
Install shaft (6) .
Illustration 5 g00442635
Pack upper bearing (7) with 5P-0960 Molybdenum Grease . Install upper bearing (7) .
Align the tab on nut lock (8) with the slot on the shaft. Install nut lock (8) .
Illustration 6 g00442636
Use Tooling (B) to install locknut (9) .
Tighten the locknut to a torque of 4.5 N m (40 lb in) .
Rotate the shaft for 5 - 10 revolutions.
Back off the locknut and tighten the locknut to a torque of 4.5 N m (40 lb in) .
Back off the locknut to the tab of the nearest slot.
Bend the tab into the slot.