LINES GP-TRACK TENSION 2213336 - Caterpillar

Save Display Configuration
The "Save Display Configuration" dialog lets you save your machine configuration to the data card. From this dialog you can save all the settings in the "Setup Menu" dialogs except the GPS receiver configuration settings sent from the .cfg file.Perform the following steps in order to access the "Save Display Configuration" dialog.
From the "Setup Menu - Configuration" dialog, press the down arrow key or the up arrow key until "Save Display Configuration" is highlighted.
Make sure that a data card is inserted in the CD550 display. If a data card is not inserted in the CD550 display a message appears.
Illustration 1 g01024767
Press the "OK" key. A dialog similar to illustration 1 appears.The configuration filename depends on the selected machine type. The following are the default filenames.
DOZER NN
GRADER NN
MOTOR SCRAPER NN
TOWED SCRAPER NN
CARRY-ALL SCRAPER NN
WHEEL LOADER NN
WHEEL TRACTOR NN
COMPACTOR NN
SUPERVISOR'S TRUCK NN
RUBBER TIRE DOZER NN
GENERIC NNNN is a number starting at 01. The number assigned to a new CD550 display configuration file is one more than any similarly named configuration already on the data card. For example, if your machine type is a dozer and there is already a dozer display configuration file called DOZER 01 on the card, the CAESbasic system assigns the name DOZER 02.You can also save the configuration with a name that is more descriptive, for example, D9 DOZER. In order to do this, press the arrow keys in order to edit the default name.Note: You cannot overwrite an existing display configuration file with the CD550 display.
Do one of the following.
In order to save the configuration to the data card, press the "OK" key. The "Save Display Configuration" dialog closes and the "Setup Menu - Configuration" dialog appears.
In order to close the dialog without saving the configuration to the data card, press the "ESC" key. The "Setup Menu - Configuration" dialog appears.Note: If you change the default name and then press the "ESC" key, a message appears in order to confirm that you want to abandon your changes.Restore Display Configuration
The "Restore Display Configuration" dialog lets you restore the previously saved CD550 display configurations. From this dialog you can restore all the settings in the "Setup Menu" dialogs except the GPS receiver configuration settings sent from the .cfg file.Perform the following steps in order to access the "Restore Display Configuration" dialog.
From the "Setup Menu - Configuration" dialog, press the down arrow key or the up arrow key until "Restore Display Configuration" is highlighted.
Make sure that a data card is inserted in the CD550 display.
Illustration 2 g01024793
Press the "OK" key. A dialog shows the list of the display configuration files that are saved on the data card. This is shown in illustration 2.
Press the down arrow key or the up arrow key in order to highlight the display configuration you require.
Press the "OK" key.If you attempt to restore an invalid display configuration, or a display configuration for a different machine type, a warning message appears. This text appears on the "Setup Menu - Configuration" dialog.
"Restoring display configuration. Please