LINES GP-STABILIZER 2225622 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 3749636 FLASHER-ELEK
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 23% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job
Note: An additional $300 US Dollars is allowed for miscellaneous costs such as mileage and travel.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Note: Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. Refer to the Operation and Maintenance Manual "Safety Section".
1. Position the machine on firm level ground, engage park brake, turn off battery disconnect switch, and leave the machine to cool before proceeding with the remainder of the Rework Procedure.
2. Open the cab right hand cab door and fuse panel access door. Refer to Image1.3.1.
Image1.3.1
3. Locate and remove existing 374-9636 Flasher Relay. Refer to Image1.4.1.
Image1.4.1
4. Install a new 374-9636 Flasher Relay.