LINES GP-RIPPER 2261742 - Caterpillar

Illustration 1 g02849397
Table 1
Specification for 117-8846 Electric Starting Motor Gp
Item Qty Part Specification Description
1 4 6V-8188 Nut Torque to 30.5 3.5 N m (269.9 31.0 lb in).
2 1 242-7979 Solenoid As Current consumption (draw) at 30 V and at 25 °C (77 °F):
1. For Pull-in windings is 38 amp
2. For Hold-in windings is 6 amp
B - - The clearance between the pinion and the housing is 9.1 mm (0.36 inch).
3 2 4B-2049 Nut Torque to 2.25 0.25 N m (19.91 2.21 lb in).
4 2 6V-8188 Nut A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (3). A maximum of two of the terminals may be equal to or greater than 0 AWG.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
No load conditions at 25 °C (77 °F):
1. Speed is 6500 1000 rpm
2. Current draw is 87.5 12.5 Amp
3. Voltage is 30 VDC