LINES GP-WATER 2296228 - Caterpillar

2296228 LINES GP-WATER Caterpillar parts C11, C13

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2296228
229-6228
2296228

Buy LINES GP-WATER 2296228 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Hospital Benefit Reception Tonight Formal Folding Coroplast A-Frame Double Sided 23x23 in. Sign

$29.99

17 Oct 2025

US: Work House Sign

Hospital Benefit Reception Tonight Formal Folding Coroplast A-Frame Double Sided 23x23 in. Sign
Work House Signs Durable Folding A-Frame Sign – Made from industrial-grade coroplast (corrugated plastic) that is lightweight, waterproof, and UV-resistant, built to handle indoor or outdoor use. || Double-Sided Display – Features two 23"x23" sign panels for maximum visibility from both directions, making it ideal for sidewalk advertising, storefront signage, open house signs, and event promotions. || Lightweight & Portable – Easy to carry, set up, and fold flat for compact storage or transport; perfect for temporary business signs, trade shows, and real estate marketing. || Versatile Business Signage – Use as a sidewalk sign, retail display board, restaurant menu stand, or event directional sign—a cost-effective solution for high-impact advertising. || Professional Presentation – Clean, modern design delivers a polished look that draws attention to your message, ideal for small businesses, restaurants, boutiques, and service providers.

Number on catalog scheme:

Caterpillar 2296228 Parts scheme LINES GP-WATER

For full view, you need register

Compatible equipment models: 2296228:

TRUCK ENGINE C11 C13 Caterpillar

Information:

You must read and understand the warnings and instructions contained in the Safety section of this manual before performing any operation or maintenance procedures.Engine Crankcase Breather
Clean Breather
With the engine stopped and cool. Remove the access cover located on the right side of the engine. 1. Loosen the breather outlet hose clamp and remove the hose from the breather cover.2. Remove the breather.3. Check the condition of cover seal. Replace with new seal if the used one is damaged.4. Wash the element and cover assembly in clean, nonflammable solvent.5. Shake, or use pressure air, to dry the element.6. Install the clean breather element cover assembly.7. Install the hose and clamp.Transmission
Change Filter
1. Remove the access cover on the left rear side of the operator's platform. 2. Use a strap-type wrench or a cross bar to remove the filter housing.3. Remove and discard the used element.4. Clean the filter housing with a clean, nonflammable solvent.5. Clean the housing base.6. Insert a new filter element into the filter housing.7. Inspect the filter housing seal. Replace the seal, if it is damaged.8. Install the filter housing into the housing base. 9. Start the engine. Apply the service brake. Use the right brake pedal only. 10. Slowly operate the transmission controls to circulate the transmission oil.11. Lock the transmission control lever in NEUTRAL. Inspect for leaks. 12. Maintain the oil level to the FULL mark on dipstick (1). Add the oil through fill tube (2) if necessary.13. Stop the engine and install the access cover.Hydraulic System
Change the Filter
1. Remove the oil filler cap (1) to relieve the tank pressure. 2. Loosen the retaining bolts.3. Remove the cover (2) and filter.4. Discard the filter element.5. Inspect the condition of the "O" ring seal. Replace if necessary.6. Install a new filter element and cover (2). Tighten the cover retaining bolt to 58 N m (40 4 ft lb). 7. Maintain the hydraulic oil to the FULL mark in sight gauge (3). Add oil if necessary through the fill tube.8. Inspect the filler cap gasket. Replace the gasket, if it is damaged. Install the oil filler cap (1).Fuel System
Clean and Change Filters
Do not fill fuel filters with fuel before installing them. Contaminated fuel will cause accelerated wear to fuel system parts.
Wash the Primary Filter Element
1. Remove the left rear access cover of the machine. 2. Loosen the filter housing retaining bolt.3. Remove the housing and element.4. Remove the element from the case.5. Wash the element and housing in clean, nonflammable solvent.6. Dry the element using pressure air.7. Clean the filter case base.8. Inspect the seal. Replace if damaged.9. Insert the clean element.10. Install the element and case into housing.11. Retighten the retaining bolt to a torque of 24 4 N m (18 3 lb ft).Change Secondary Fuel Filter
1. Remove and discard the filter.2. Clean the filter mounting base. Be sure all of the old seal is removed.3. Coat the seal of a new filter with clean diesel fuel.4. Install the new filter