LINES GP-EXHAUST 2321829 - Caterpillar

Which Generate This Code:The signal from the filtered oil pressure sensor to the master Electronic Control Module (ECM) is less than 0.2 VDC for at least five seconds.Additionally, neither of the following diagnostic codes are active:
262-03 5 Volt Sensor DC Power Supply short to +batt
262-04 5 Volt Sensor DC Power Supply short to groundSystem Response:The master ECM assumes the last valid value for the engine oil pressure. The monitoring of the oil pressure is disabled. This disables the engine protection for low oil pressure and for excessive oil pressure.The fuel is shut off. The shutdown output is activated. The code is logged.Since the engine protection is disabled, the engine is shut down.Test Step 1. Perform the following diagnostic procedure: Analog Sensor SignalResults:
OK - STOP