LINES GP-BOOM CYLINDER 2424839 - Caterpillar

Illustration 27 g00489680
Remove snap ring (93) from pump housing (15) .
Illustration 28 g00489681
Remove four bolts (94) and cover (95) from the pump housing.
Illustration 29 g00489686
Remove retainer (96) from flow control valve (97) .
Illustration 30 g00489691
Use a press and apply pressure to plate (98) from flow control valve (97) .
Use Tooling (A) to remove snap ring (99) from flow control valve (97) .
Illustration 31 g00489697
Remove two spacers (100) from the flow control valve.
Illustration 32 g00489720
Remove nut (101) from shaft (102). Remove cap (103) from the shaft.
Illustration 33 g00489721
Remove retainer (104) and O-ring (105) from the shaft.
Use a press and apply pressure to the plate. Use Tooling (A) to remove snap ring (106) and spacers (107) .
Illustration 34 g00489726
Remove shaft (102), plate (108), spring (109), spring (110), and plate (111) from the flow control valve.
Illustration 35 g00489728
Remove plate (112), spring (113), spring (114), and plate (115) from the other end of the flow control valve.
Illustration 36 g00489731
Remove O-rings (116) from both of the caps.
Illustration 37 g00489733
Remove snap ring (117) from shaft (118) .
Remove shaft (118) from the pump housing.
Illustration 38 g00489736
Remove swashplate (119), guide block (120), two bearings (121), two bearing races (122), and two pins (123) from the pump housing.
Illustration 39 g00489738
Remove bearing (124) from the pump housing.
Illustration 40 g00489739
Remove two spring pins (125) from the pump housing.
Illustration 41 g00489780
Remove the remaining six plugs (126) from the pump housing.
Remove adapter (127) and pressure tap (128) from the pump housing.