LINES GP-HEATER 2487014 - Caterpillar

Illustration 10 g01173345
The Toolbar configuration dialog
Select the "Display Text" check box in order to include the descriptions of the buttons with the bitmaps.
Select the "Bottom" radio button if the descriptions of the buttons are to appear below the bitmaps.
Select the "Right" radio button if the descriptions of the buttons are to appear on the right side of the bitmaps.
Complete the configuration of the toolbar as discussed in Systems Operation, "Configuring a fixed toolbar". Illustration 11 shows a Toolbar that has been configured with x = 40, y = 60. The "Display Text" option has been selected. The text has been set to appear at the "Bottom" of the bitmap.
Illustration 11 g01173358
Toolbar with expanded button size. The expanded button area below the bitmap is used in order to display text.Changing Toolbar Descriptions
$ Toolbar Description - This key identifies the tool that the description applies to. The key also includes the new description for the tool.Two examples of the use of the Toolbar Description keys are:
$ Toolbar Description 0 = 40240 2500The description for the first tool is now "2500".
$ Toolbar Description 1 = 40241 2550The description for the second tool is now "2550".Auto Close Toolbars
Dynamic toolbars are closed automatically after a period of inactivity. If a toolbar is not used, then the toolbar is closed eight seconds after it is opened. If the toolbar is used, then it is closed after three seconds of inactivity. The delays can be modified for automatic toolbar closure. The automatic closure of toolbars can also be disabled altogether.
Open the "CAESultra menu" and select the "Systems" menu option. The "Systems" sub menu is opened.
Select the "Auto Toolbar Cancel" menu option in order to change the state. A check mark beside this menu option indicates that the toolbars will be closed automatically. If this option is unchecked, the automatic closure of toolbars is disabled.$ Toolbar Start Cancel Time - This key specifies how long the toolbar will remain open after the toolbar has been initially activated.$ Toolbar Inactive Cancel - This key specifies how long the toolbar will remain open after use. For example, in order to configure a toolbar to close ten seconds after it opens (but is not used), and once it is used, to close after five seconds of inactivity the keys would be defined as follows:
$ Toolbar Start Cancel Time =10000
$ Toolbar Inactive Cancel Time =5000If these two toolbar cancel keys are not enabled, then the default behavior applies.
Illustration 12 g01173361
Auto Toolbar Cancel option selectedSending the CAESultra Screen Configuration File to the Machine
In order to send the screen configuration text file to the machine, complete the following steps:
Use the CAESultra Screen Configuration utility in order to configure the screen to suit your requirements.
Use the "Save Screen As" option in order to enter the new screen configuration file name that is to be used for the new screen configuration. This will ensure that the file will not be overwritten the next time the CAESultra Screen Configuration utility is used. For example, if a reconfigured grade