LINES GP-CONTROL 2489831 - Caterpillar

Caterpillar Electronic Technician (Cat ET)
Illustration 1 g02615483
Connections for the Communication Adapter 3 Gp and Cat ETThe components that are needed to use the Communication Adapter Gp and Cat ET are listed: (1) Current version of Cat ET software (2) 317-7484 Communication Adapter 3 Gp (3) Service diagnostic cable (4) CableCaterpillar Electronic Technician (Cat ET) is a software program that is used to access, view, monitor, and change the data that a particular ECM is using to control a machine system. Cat ET can be used to perform maintenance on the machine. Some of the options that are available with Caterpillar Electronic Technician are listed below:
View the active diagnostic codes and logged diagnostic codes. Refer to Troubleshooting, "Using the Caterpillar Electronic Technician to Determine Diagnostic Codes".
Viewing the active event codes and logged event codes
View the status of parameters.
Clear active diagnostic codes and clear logged diagnostic codes
Perform calibrations of machine systems.
Program the ECM (Flash). This programming is done with the "WINflash" program. Refer to Testing and Adjusting, "Electronic Control Module (ECM) - Flash Program".
Print reports.The following list contains some of the diagnostic functions and programming functions that are performed by Cat ET.
The failures of the ECM system are displayed.
The status of most of the inputs and the outputs are displayed.
The settings for the ECM are displayed.
Display the status of the input and output parameters in real time.
Display the clock hour of the internal diagnostic clock.
The number of occurrences and the clock hour of the first occurrence and the last occurrence is displayed for each logged diagnostic code.
The definition for each logged diagnostic code and each event is displayed.
Load new FLASH software.
Active diagnostic codes
Logged diagnostic codesRefer to Troubleshooting, "Diagnostic Code List" for the list of diagnostic codes that can be activated by all of the Implement ECM control modules.Event Codes
Logged Event Codes
Illustration 2 g02018654
Typical Cat ET screen for logged eventsAn indicator for logged events is provided. The indicator allows the service technician to track event codes that are intermittent. The data for the logged event will include the following information:
An event identifier (EID)
A text description of the problem
The number of occurrences of the problem
A time stamp will display the last occurrence of the problemStatus Groups For The Electronic Technician
The Status groups list the machine parameters. The statuses of the parameters are shown in real time.
Illustration 3 g02018673
Typical Cat ET Status ScreenAccessing Diagnostic Codes With The Monitoring System LCD Display
Perform the following steps in order to view the active events and diagnostic codes using the LCD display:
Illustration 4 g01518821
LCD Display - Home
Press the "Menu" button in order to view the Main Menu.
Illustration 5 g01518822
LCD Display - Main Menu
At the main menu page, scroll to the "Service" menu option and press the "OK" button.
Illustration 6 g02478072
LCD Display - Service Menu
At the service menu page, the first option in the service menu will be "Diagnostics". Press "OK" in order to view the list of active codes and logged codes.
Illustration 7 g01518824
LCD Display - Diagnostics and Events
The Diagnostics list page will show the description and show whether the code is currently