LINES GP-BOOM CYLINDER 2551796 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01207904
Turn the fuel supply valve to the OFF position.
Disconnect harness assembly (1).
Remove fuel temperature sensor (2) from the fuel filter base.
Remove the O-ring seal from fuel temperature sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01207904
Install a new O-ring seal on fuel temperature sensor (2).
Install fuel temperature sensor (2) and tighten to a torque of 20 5 N m (15 4 lb ft).
Connect harness assembly (1).
Turn the fuel supply valve to the ON position.