LINES GP-RETURN 2551798 - Caterpillar

Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01077736
Remove tube assembly (6). Remove the O-ring seal from the tube assembly.
Remove the suction bell assembly and tube assembly (2). Remove the O-ring seal from the tube assembly.
Remove bolts (5) and remove engine oil pump (1) from the cylinder block.
If necessary, remove bolts (4) and remove underframe assembly (3).