LINES GP-WATER 2559245 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06000949
Disconnect tube assembly (2), tube assembly (3), and tube assembly (5) from the exhaust bypass valve.
Remove four nuts (4). Remove exhaust bypass valve (1) and the gasket.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g06000949
Install the gasket and exhaust bypass valve (1) with four nuts (4). Tighten nuts (4) to a torque of 35 5 N m (26 3.5 lb ft)
Connect tube assembly (2), tube assembly (3), and tube assembly (5).Note: The exhaust bypass valve must be adjusted after installation and before operating the engine.