LINES GP-FRONT 2559641 - Caterpillar

Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations.
Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.Rated loads are based upon a standard machine with the following conditions:
proper lubricants
full fuel tank
enclosed ROPS
80 kg (176 lb) operator
23.5 R25 L-3 tires or equivalentRated loads will vary for different attachments. Consult your Caterpillar dealer about the rated load for specific attachments.For North America, the rated operating load is defined by SAE "J1197" (February 1991) as 50% of the full turn static tipping load.For Europe, the rated operating load is defined by CEN "474-3" as 60% of the full turn static tipping load.
Illustration 1 g00275722
The clearance and the reach are given for each implement at the maximum lift height. Clearance (A) is measured from the ground to the bottom edge of the implement. Reach (B) is measured from the front of the front tire to the front vertical edge of the implement.The following table provides the rated operating loads for the standard machine (North American configuration).
Table 1
Rated Load ( IT62G Pallet Fork)    
Part Number (Pallet Fork)     115-7448    
Maximum Clearance
A    
3790 mm (149 inch)    
Full Reach
B    
1117 mm (44 inch)    
Overall Length With Fork on Ground    
8755 mm (345 inch)    
Maximum Load    
4141 kg (9129 lb)    Reference: Refer to Special Publication, GELQ0149, "Wheel Loader Fork Application Guide" for the rated loads of other machine configurations.