LINES GP-FUEL 2677069 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-0510     Driver Group     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00609491
Illustration 2 g00609490
Use Tool (A) to install bushing (7) into rocker arm (6), if the bushing was removed.Refer to Specifications, "Rocker Shaft" for more information.
Illustration 3 g00609488
Install spacer (4) and clip (3) onto one end of shaft assembly (5) .
Slide components onto shaft (5) in the correct order. Refer to Illustration 1 in order to install the components correctly.
The shaft assembly includes the following components:
Bolt (1)
Oil tube (2)
Clip (3)
Spacer (4)
Shaft assembly (5)
Rocker arm (6)
Bushing (7)
Rocker shaft bracket (8)
Spring (9)
Install spacer (4) and clip (3) onto the other end of shaft assembly (5) .
Install bolt (1) and oil supply tube (2) into the end of shaft assembly (5) .End By: Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".