LINES GP-WATER 2695787 - Caterpillar

Illustration 1 g01959954
(1) Filler Cap
(2) Cold transmission oil level
(3) Warm transmission oil level and the engine at low idle The sight gauge for the transmission oil level is located on the left side of the machine near the articulation joint.Note: Before the machine is started, the transmission oil level should be above "MIN START" mark (2) on the upper end of the sight gauge.
Operate the machine for a few minutes in order to warm the transmission oil.
Park the machine on a hard, level surface. Put the transmission control into the NEUTRAL position. Lower the bucket to the ground with a slight downward pressure. Engage the parking brake.
Check the oil level while the engine is running at low idle. While the engine is running at low idle, the transmission oil level should be between the "MIN" mark and the "MAX" mark (3).
If necessary, remove the filler cap and add oil.