LINES GP-WATER 2701538 - Caterpillar

Illustration 2 g06354633
Select "My Worklist" to search for a connected asset by entering the serial number and clicking the "Search" button.
Illustration 3 g06354634
The search results page will show the asset. Below the Product Link subscriptions are options for Additional Services. Select "Cat GRADE Connectivity" from the additional service menu.
Illustration 4 g06354635
An alert will appear indicating that this feature provides cellular data services for the listed features. But to utilize some of these features fully, other third-party services may be required.
Illustration 5 g06354636
With the Cat GRADE Connectivity service selected, click "Review & Submit".
Illustration 6 g06354637
Before the final submission, the system will allow the review of current and selected services for this asset.Note: The Cat GRADE connectivity service will have a promotional period of six months from service start, where the Cat GRADE connectivity service charge will be reimbursed.
Illustration 7 g06349818
Dealer service portal
Verify that the network configuration in the Product Link dashboard is correct.
Illustration 8 g06349822
Network configuration screen
If changes to the network configuration are necessary, unlock the ports to complete the changes.
Illustration 9 g06349826
Network configuration screen - Port 8 values
"Port 8" should be set to the following values:VLAN - "40"Device Type - "Cat GRADE Auto Detect"
If changes have been made to port values, the values need to be saved and the network manager should be rebooted. This can take a couple minutes.
This completes the settings changes necessary on the network manager.
Illustration 10 g06354638
While the GRADE EC520 controller is wired to the network manager as ordered from the factory, the GRADE system must be configured to look for the network manager. In the GRADE web interface, access the "Installation Assistant" screen to check or change the settings related to the GRADE connectivity. The setup wizard page should show "Cat Network Manager - Enabled".
The GRADE connectivity setup is completed.Note: The subscription update from the dealer service portal can take some time.The GRADE connectivity enables some additional features if TCC and/or VRS GNSS corrections services have been secured for the system. Follow the procedure below for setting up the additional features:
Illustration 11 g06354639
Connected community - login page
For connecting the machine to TCC, enter the login credentials from an EC520 registered with TCC.
For syncing the files from TCC, a manual prompt may be issued by the operator. The machine can also be setup to sync every 15 minutes in the web interface.
Illustration 12 g06354687
Correction source add screen
For connecting to a VRS GNSS correction stream, add a correction source and select "Internet". Enter the VRS GNSS correction stream port and credentials provided from the VRS service.
Illustration 13 g06349840
Correction source screen
Once the VRS correction source is entered and the system has a valid stream of internet data, the correction source will turn green indicating data is being received from the VRS source.These steps complete the setup of GRADE Connectivity. The features that the GRADE connectivity provide may be unavailable if the cellular service in the machine location becomes weak.