LINES GP-AIR 2900710 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Illustration 1 g00690963
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g01206296
Position control manifold (5) and connect hose assembly (7).
Illustration 3 g01206291
Install bolts (6).
Illustration 4 g01206288
Connect hose assemblies (4). Note: A small amount of oil will drain from all of the hose assemblies when the plugs are removed from the hose assemblies. Make sure that you contain the hydraulic oil.
Connect harness assemblies (3) to control manifold (5).
Remove Tooling (A) and install the cap to the hydraulic tank.
Illustration 5 g00704703
Position access cover (1) and install bolts (2) that are under the main control valve.