LINES GP-OIL 2948550 - Caterpillar

preparatory steps: a) remove engineb) remove pistons1. Check to be sure that all coolant has been drained from the cylinder block.2. Cover the crankshaft bearing journals before removing cylinder liners. 3. Using tool (A), remove the cylinder liners.Install Cylinder Liners
1. Clean the cylinder liners and liner bores in the cylinder block.2. Install new O-ring seals on the cylinder liners.3. Coat O-ring seals and mating bore with liquid soap to ease installation of liners. 4. Using plate (A), drive the cylinder liners into place. 5. Using tool (B) and two 5/8"-11NC X 4-11/2" long bolts, clamp the liner in position. Tighten the two bolts evenly to 50 lb. ft. (6,9 mkg).6. Check the cylinder liner projection using tool group (C). Liner projection must be .0020 - .0056 in. (0,051 - 0,142 mm).concluding steps: a) install pistonsb) install engine