LINES GP-AIR COMPRESSOR 2W6528 - Caterpillar

Remove and discard pressure switch (1) .Note: Plug (A) will be used in Step 5 of ""Installation Procedure"".Installation Procedure
Illustration 2 g03514176
Brake control valve group (2) 445-5108 Pressure Sensor (3) 434-1525 Sensor Harness As (B) Receptacle
Install 445-5108 Pressure Sensor (2) and tighten to a torque of 25 N m to 50 N m (19 lb ft to 37 lb ft).
Install 434-1525 Sensor Harness As (3) .Note: Receptacle (B) will be used in Step 4.
Illustration 3 g03518357
(4) 434-2631 Harness As (C) Plug (D) Receptacle (E) Receptacle (F) Plug (G) Splice receptacle
Illustration 4 g03516180
Left side view of rear frame (5) Rear main harness
Illustration 5 g03520372
Left side view of rear frame (4) 434-2631 Harness As (5) Rear main harness (6) 3S-2093 Cable Strap (C) Plug (D) Receptacle (E) Receptacle (F) Plug (G) Splice receptacle (H) Ground terminal (J) Receptacle
Secure 434-2631 Harness As (4) to rear main harness (5). Use five 3S-2093 Cable Straps (6). Refer to Illustration 3, Illustration 4, and Illustration 5.
Illustration 6 g03516178
(4) 434-2631 Harness As (A) Plug (B) Receptacle (C) Plug (D) Receptacle (E) Receptacle (F) Plug (G) Splice receptacle (J) Receptacle (K) Plug
Install plug (C) of 434-2631 Harness As (4) to receptacle (B) of 434-1525 Sensor Harness As (3). Refer to Illustration 2, Illustration 3, Illustration 5, and Illustration 6.
Install plug (A) to receptacle (D) of 434-2631 Harness As (4). Refer to Illustration 1, Illustration 3, Illustration 5, and Illustration 6.
Illustration 7 g03516177
Left side view of rear frame (7) Bolt (8) Clip (H) Ground terminal (J) Receptacle (K) Plug
Remove and discard bolt (7). Retain ground terminal (H) and clip (8) for installation purposes.
Disconnect plug (K) from receptacle (J) .
Illustration 8 g03516076
Front view (8) Clip (9) 130-5300 Clip (10) 5S-7383 Bolt (11) 1K-4649 Spacer (G) Splice Receptacle (H) Ground terminal (J) Receptacle (K) Plug
Install clip (8), two 130-5300 Clips (9), 1K-4649 Spacer (11), ground terminal (H) and 5S-7383 Bolt (10). Refer to Illustration 8.
Illustration 9 g03516300
Top view (4) 434-2631 Harness As (E) Receptacle (F) Plug (G) Splice receptacle (J) Receptacle (K) Plug
Install plug (K) to receptacle (E) of 434-2631 Harness As (4) and secure using clip (8). Refer to Illustration 8 and Illustration 9.
Secure splice receptacle (G) using 130-5300 Clip (9). Refer to Illustration 8 and Illustration 9.
Install plug (F) of 434-2631 Harness As (4) to receptacle (J) and secure using 130-5300 Clip (9). Refer to Illustration 8 and Illustration 9.