LINES GP-FUEL 3105811 - Caterpillar

Illustration 1 g01712913
Note: Apply a light film of clean oil to the surfaces of two bearing cones and two bearing cups of two bearings. (1) Preload of two bearings ... 6.8 1.2 N m (60 10 lb in) (2) Torque for the locknut ... 374 N m (280 lb ft) (3) Apply a light film of clean oil to the surfaces of eight bearing cups. (4) Apply a light film of clean oil to the surfaces of four planetary gears. (5) Apply a light film of clean oil to the surfaces of eight bearing cones. (6) Torque for 20 bolts ... 143 7 N m (105 5 lb ft)Note: Apply 5P-3413 Pipe Sealant to the threads of the pipe plugs (7) . (7) Torque for three pipe plugs ... 29 5 N m (21 4 lb ft)The holes (8) for the motor mount are timed in the clockwise direction with three pipe plugs (7) which are installed on the hub, as shown. (9) Apply a light film of clean oil to the surfaces of the seal. (10) Apply a light coat of clean grease to the surfaces of six thrust bearing races. (11) Apply a light film of clean oil to the surfaces of the sun gear.Note: Apply 185-3996 Thread Lock Compound to the threads of the bolts (12) . (12) Torque for 12 bolts ... 80 N m (60 lb ft) (13) Apply a light film of clean oil to the surfaces of two thrust bearing races. (14) Apply a light film of clean oil to the surfaces of the thrust bearing. (15) Apply 1U-8846 Gasket Sealant to the surfaces of the hub. (16) Apply a light film of clean oil to the surfaces of the ring gear. (17) Apply a light coat of clean grease to the sealing lip of two O-ring seals.Gear ratio of 5.4 to 1.0 and output torque rating ... 14150 N m (10440 lb ft)