LINES GP-CONNECTING 3515944 - Caterpillar

Illustration 1 g03324430
Table 1
Specification for 349-4110 Blade Cylinder Gp
Item Qty Part Specification Description
1 1 099-0695 Ring Before assembly, apply 4C-9614 Silicone Sealant to the hole of the ring.
2 1 273-6945 Bushing Bore before assembly is 60.15 0.04 mm (2.368 0.002 inch).
Installation depth is 9.85 0.50 mm (0.388 0.020 inch).
3 1 326-4417 Locknut Before assembly, lubricate the face and the thread with 309-6932 Hydraulic Oil all around.
Torque to 4500 230 N m (3319 170 lb ft).
4 1 119-5445 Ring Lubricate the inside diameter and the outside diameter with the clean grease.
5 1 9X-3592 Seal As Lubricate the inside diameter and the outside diameter with the clean grease.
6 1 143-8027 Ring Lubricate the inside diameter and the outside diameter with the clean grease.
B 1 283-6083 Rod As Diameter is 79.930 0.030 mm (3.1468 0.0011 inch).
C 1 326-4452 Hydraulic Cylinder Bore is 120.00 0.10 mm (4.724 0.004 inch).
D 1 123-9950 Head Bore over two lands is 80.53 0.03 mm (3.170 0.001 inch).
Prior to drilling operation tighten the head to 1100 110 N m (811 81 lb ft).
7 1 273-6945 Bushing Bore before assembly is 60.15 0.04 mm (2.368 0.002 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
8 1 355-5814 Buffer Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
9 1 355-5816 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
10 1 165-9285 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
11 - - Apply green Loctite 609 to the wiper seal groove.
12 1 114-0755 Bushing Outside diameter is 85.133 0.033 mm (3.3517 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).