LINES GP-FUEL FILTER 3535087 - Caterpillar

The existing 6V-1792 track bolts and 1S-1860 track nuts can loosen or break on certain D6T Track-Type Tractors operating in landfill applications. If the existing hardware loosens, the track and the shoe may become damaged.
AFFECTED PRODUCT
Model Identification Number
D6T LGP HTZ00251, 274-278, 280-283, 302-304, 306, 308, 352, 360, 362, 419, 445, 448, 482-483, 498-500, 503, 534-535, 537, 541, 561, 620, 634-635, 650, 661-663, 665, 667, 672, 697, 703-705, 707-709
JML00283, 286, 296, 300
KJL00952, 962, 1083-1084, 1090, 1263, 1290
ZJB00228, 274, 312, 395, 411, 465, 471, 1265, 1274, 1341, 1354-1356, 1366, 1368, 1370, 1500, 1511, 1545, 1547, 1552, 1554, 1596, 1629, 1680, 1692
D6T LGP PAT KSB00296
RAD00677
D6T XL GMK00496
D6T XW LBD00195
MB500232
SKL00713, 719
SLJ00267, 335-336, 1164
TMY00244, 318, 371
D6T XW PAT WRN00528, 554
PARTS NEEDED
Qty
Part Number Description
1 9W3361 NUT-TRACK 4 Per Shoe (4-176 As required)
1 5420222 BOLT-TRACK 4 Per Shoe (4-176 As required)
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 3% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Participation is limited to 4000 part hours, 100% link wear, or 4 part years, whichever comes first.
If any hardware is found loose or missing, then replace all hardware on that shoe. Clean the abutment surfaces and apply lubricant to the threads prior to installation. Tighten each bolt to 400 N-m, followed by an additional turn of 120 degrees.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-4000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
For repairs made in the shop:
During assembly of new shoes onto new link assemblies, replacement of all bolts and nuts is covered. No labor is provided.
During pin and bushing turn, replacement of all bolts and nuts is covered. No labor is provided during turn time.
This Service Letter can be used only once per machine when replacing all track bolts and track nuts.
For repairs made in the field:
When failures occur in the field, 1/2 hour of labor is covered per shoe.
This Service Letter can be used multiple times per machine for field repairs. A field repair is defined as the replacement of 20 track bolts and 20 track nuts or less.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.