LINES GP-DIAGNOSTIC 3600218 - Caterpillar

A raised body (bed) may fall unexpectedly and without warning resulting in personal injury or death.When it is necessary to work under the truck with the body (bed) raised, install the body (bed) retaining pins through the pin bores in the frame and the retaining brackets on the body.
Illustration 1 g02174593
Spring rod (A)
Spring rod (B)
( 1) Body retaining pin
(2) Body retaining bracket
(3) Frame support Installation
Raise the dump body to the fully raised position. Stop the engine and make sure that the transmission control is in the P (Parking Brake Applied) position.
Illustration 2 g02174605
Pull spring rod (A) and remove body retaining pin (1) from the stored position on the left side.
Illustration 3 g02174606
Pull spring rod (B) and install body retaining pin (1) through the pin bore in frame support (3) and body retaining bracket (2). Note: In order to secure the body retaining pin, make sure that the body retaining pin is fully seated before releasing spring rod (B).
Perform Step 2 and Step 3 on the right side. Removal
Raise the dump body to the fully raised position in order to relieve any pressure from the body retaining pins. Stop the engine and make sure that the transmission control is in the P position.
Pull spring rod (B) and remove the body retaining pins from the frame support on the left side.
Pull spring rod (A) and install the body retaining pin in the stored position. Note: In order to secure the body retaining pin, make sure that the body retaining pin is fully seated before releasing spring rod (A).
Perform Step 2 and Step 3 on the right side.
Lower the dump body.