3665861 LINES GP-ALTERNATOR AIR Caterpillar parts
D9T
Rating:
Alternative (cross code) number:
CA3665861
366-5861
3665861
CA3665861
366-5861
3665861
TRACK-TYPE TRACTOR,
Compatible equipment models: 3665861:
Number on catalog scheme:
For full view, you need register
Information:
Torque Converter
(1) Clearance between the turbine and stator: Across the diameter (new) ... .015 .003 in.(0.38 0.08 mm)Maximum permissible clearance across the diameter ... .0225 in.(0.572 mm) To measure the clearance between the turbine and the stator, use the following procedure:1. Put the stator (10) in a horizontal position with the ring (4) up.2. Put the turbine (2) in position on the ring (4) of the stator so it is on surface (15).3. Move the turbine to one side of the bore in ring (4) so the side of the turbine is against the inside of ring (4).4. Fasten a dial indicator to the stator on the opposite side of the point of contact with the contact point on the turbine.5. Move the turbine to the other side of the bore in ring (4) toward the dial indicator.6. Measure the distance moved with the dial indicator. This is the clearance across the diameter.(3) Torque for eight bolts ... 35 2 lb.ft.(4.8 0.3 mkg)(6) Clearance between impeller and stator: Across the diameter (new) ... .012 .003 in.(0.30 0.08 mm) To measure the clearance between the impeller and stator, use the following procedure:1. Put the stator (10) in a horizontal position on a support with the ring (4) up. 2. Put the impeller (5) in position on the ring (4) of the stator so it is on surface (16).3. Move the impeller to one side of the bore in ring (4) so the side of the impeller is against the side of the ring.4. Fasten a dial indicator to the stator on the opposite side of the point of contact with the contact point on the impeller.5. Move the impeller to the other side of the bore in ring (4) toward the dial indicator.6. Measure the distance moved with the dial indicator. This is the clearance across the diameter. (9) Measurement for clearance between impeller rim and turbine ... 1.536 .010 in.(39.0 0.25 mm) To measure the clearance between the impeller rim and turbine, use the following procedure.1. Put torque converter assembly so the input end of shaft (8) is up.2. Remove the stator assembly (10).3. Pull impeller (5) up against bearing (7) and hold against bearing.
Do not move bearing (7) on shaft (8).
4. Using a depth micrometer, measure the distance from the top of the impeller (5) through hole (12) to the impeller (9). A measurement of 1.536 .010 in. (39.0 0.25 mm) will give the correct clearance between the impeller rim and turbine.5. If measured dimension (9) is too small, remove shims (13). If measured dimension (9) is too large add shims (13). (11) Clearance between the impeller and turbine: Across the diameter (new) ... .012 .003 in.(0.30 0.08 mm)Maximum permissible across the diameter ... .018 in.(0.46 mm) To measure the clearance between the impeller and turbine, use the following procedure:1. Put the turbine (2) in a horizontal position with the blades up.2. Put three
(1) Clearance between the turbine and stator: Across the diameter (new) ... .015 .003 in.(0.38 0.08 mm)Maximum permissible clearance across the diameter ... .0225 in.(0.572 mm) To measure the clearance between the turbine and the stator, use the following procedure:1. Put the stator (10) in a horizontal position with the ring (4) up.2. Put the turbine (2) in position on the ring (4) of the stator so it is on surface (15).3. Move the turbine to one side of the bore in ring (4) so the side of the turbine is against the inside of ring (4).4. Fasten a dial indicator to the stator on the opposite side of the point of contact with the contact point on the turbine.5. Move the turbine to the other side of the bore in ring (4) toward the dial indicator.6. Measure the distance moved with the dial indicator. This is the clearance across the diameter.(3) Torque for eight bolts ... 35 2 lb.ft.(4.8 0.3 mkg)(6) Clearance between impeller and stator: Across the diameter (new) ... .012 .003 in.(0.30 0.08 mm) To measure the clearance between the impeller and stator, use the following procedure:1. Put the stator (10) in a horizontal position on a support with the ring (4) up. 2. Put the impeller (5) in position on the ring (4) of the stator so it is on surface (16).3. Move the impeller to one side of the bore in ring (4) so the side of the impeller is against the side of the ring.4. Fasten a dial indicator to the stator on the opposite side of the point of contact with the contact point on the impeller.5. Move the impeller to the other side of the bore in ring (4) toward the dial indicator.6. Measure the distance moved with the dial indicator. This is the clearance across the diameter. (9) Measurement for clearance between impeller rim and turbine ... 1.536 .010 in.(39.0 0.25 mm) To measure the clearance between the impeller rim and turbine, use the following procedure.1. Put torque converter assembly so the input end of shaft (8) is up.2. Remove the stator assembly (10).3. Pull impeller (5) up against bearing (7) and hold against bearing.
Do not move bearing (7) on shaft (8).
4. Using a depth micrometer, measure the distance from the top of the impeller (5) through hole (12) to the impeller (9). A measurement of 1.536 .010 in. (39.0 0.25 mm) will give the correct clearance between the impeller rim and turbine.5. If measured dimension (9) is too small, remove shims (13). If measured dimension (9) is too large add shims (13). (11) Clearance between the impeller and turbine: Across the diameter (new) ... .012 .003 in.(0.30 0.08 mm)Maximum permissible across the diameter ... .018 in.(0.46 mm) To measure the clearance between the impeller and turbine, use the following procedure:1. Put the turbine (2) in a horizontal position with the blades up.2. Put three
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts lines Caterpillar catalog:
3836168
LINES GP-TILT CYLINDER
D9R, D9T
D9R, D9T