LINES GP-FUEL 3727759 - Caterpillar

Illustration 1 g03812639
Table 1
Specification for 344-0158 Hoe Stick Gp    
Item    Qty    Part    Specification Description    
Before assembly, coat all bores for the pins and the sealing lips with black 5P-0960 Grease Cartridge. After assembly, apply black 5P-0960 Grease Cartridge to all joints from the fittings.    
1     As required, use the following shims to adjust the minimum lateral clearance to the maximum of
0.6 mm (0.02 inch):    
1 175-1794 Shim     Thickness is
0.5 mm (0.02 inch).    
1 175-1795 Shim     Thickness is
1.0 mm (0.04 inch).    
2     As required, use the following shims to adjust the minimum lateral clearance to the maximum of
0.6 mm (0.02 inch):    
1 175-1794 Shim     Thickness is
0.5 mm (0.02 inch).    
1 175-1795 Shim     Thickness is
1.0 mm (0.04 inch).    
3     As required, use the following shims to adjust the minimum lateral clearance to the maximum of
0.6 mm (0.02 inch):    
1 175-1794 Shim     Thickness is
0.5 mm (0.02 inch).    
1 175-1795 Shim     Thickness is
1.0 mm (0.04 inch).    
4     6     093-1429 Lip Type Seal     Before assembly, lubricate the sealing lips with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown.    
5     6     265-8715 Bushing     Before assembly, all bores must be free from paint and grease. After assembly, coat all the bores with black 5P-0960 Grease Cartridge.    
Bore diameter before assembly is
40.205 0.015 mm (1.5829 0.0006 inch).
Installation depth is
5.0 0.5 mm (0.20 0.02 inch).
6     3     8T-4137 Bolt     Torque to
70 15 N m (52 11 lb ft).    
7     1     266-4064 Pin As     Diameter is
39.936 to 39.975 mm (1.5723 to 1.5738 inch).    
8     1     266-4106 Pin As     Diameter is
39.936 to 39.975 mm (1.5723 to 1.5738 inch).    
9     1     266-4080 Pin As     Diameter is
39.936 to 39.975 mm (1.5723 to 1.5738 inch).