LINES GP-WATER 3775715 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00522192
Place accessory drive (8) in position and install two bolts (7). Tighten the bolts to a torque of 100 20 N m (74 15 lb ft).
Install the following items in the front housing: gear (6), the bearing and shaft (5) and bolt (4). Tighten the bolt to a torque of 240 40 N m (177 30 lb ft).
Install the following items in the front housing: gear (3), the bearing and shaft (2) and bolt (1). Tighten the bolt to a torque of 240 40 N m (177 30 lb ft).Note: Make sure that the timing marks on the gears are in alignment.End By:
Install the camshaft.
Install the speed/timing sensor.
Install the front cover.
Install the alternator.