LINES GP-PILOT 3898012 - Caterpillar

Illustration 1 g01685853
Illustration 2 g01686414
View B-B
Illustration 3 g01686415
View C-C
Illustration 4 g01686413
View A-A
Table 1
Specifications for 280-1609 Differential and Bevel Gear Gp    
Item     Qty     Part     Specification Description    
1     1     125-5862 Gear Shroud As     Adjust bracket and shroud in order to achieve equal clearance between shroud and the bevel gear on all sides.    
2     4     7X-3311 Bolt     Torque to 1600 150 N m (1180 110 lb ft)
Torque after the gear and the shroud have been adjusted properly.    
3             Apply red Loctite 271 to the threads.    
4     2     6V-7673 Bolt     Torque for two bolts
50 10 N m (37 7 lb ft)    
5     12     8X-0368 Shim     Shim thickness
0.12 mm (0.005 inch)    
6     10     8X-0369 Shim     Shim thickness
0.18 mm (0.007 inch)    
7     2     125-9733 Bracket     Adjust bracket and shroud in order to achieve equal clearance between shroud and the bevel gear on all sides.    
8     1     6M-5218 O-Ring Seal     Lubricate the sealing lip with a small amount of the lubricant that is being sealed.    
9     17     6V-5684 Bolt     Installation torque
50 5 N m (37 4 lb ft)
Additional torque 60 5 degrees    
10     12     6V-5192 Socket Head Bolt     Torque for bolts
35 8 N m (26 6 lb ft)    
11     1     8X-0332 Shim     Shim thickness
3.00 mm (0.118 inch)    
12     1     8X-0333 Shim     Shim thickness
3.10 mm (0.122 inch)    
13     1     8X-0334 Shim     Shim thickness
3.20 mm (0.126 inch)    
14     1     106-5027 Shim     Shim thickness
2.9 0.013 mm (0.1140 0.0005 inch)