AVSPARE.COM
parts catalog

LINES GP-HYDRAULIC 3904799 - Caterpillar



3904799 LINES GP-HYDRAULIC Caterpillar parts SE60 V XW LINES
Rating:
85
Alternative (cross code) number:
CA3904799
390-4799
3904799
Caterpillar 3904799 LINES GP-HYDRAULIC

Buy LINES GP-HYDRAULIC 3904799 Caterpillar genuine, new aftermarket tractor parts with delivery
ASPHALT SCREED,

Compatible equipment models: 3904799:

ASPHALT SCREED  SE60 V XW   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Personal injury or death may result from failure to adhere to the following procedures.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Do not fill the fuel filters with fuel before installing the fuel filters. The fuel will not be filtered and could be contaminated. Contaminated fuel will cause accelerated wear to fuel system parts.
Open the front access door on the left side of the machine.
Illustration 1 g00752052
(1) Drain valve
(2) Bowl
(3) Filter
(4) Filter base
Turn drain valve (1) counterclockwise in order to open. The drain valve is located on the bottom of the water separator. Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information that pertains to containing fluid spillage.
Drain the water and the sediment into a suitable container. Note: Dispose of used fluids according to local regulations.
Close the drain valve (1).
Remove filter (3) from filter base (4). A filter wrench may be used to loosen the filter. Note: The water separator element is a cartridge type filter. The filter cannot be reused.
Remove filter (3) from bowl (2). Discard the used filter.
Clean the inside surfaces of filter base (4) and bowl (2).
Illustration 2 g00752055
(2) Bowl
(3) Filter
(5) Cap
(6) Seal
Remove cap (5) from the bottom of new filter (3). Remove seal (6) from cap (5).
Install seal (6) in a groove of bowl (2).
Illustration 3 g00752056
(2) Bowl
(3) Filter
(4) Filter base
Install bowl (2) to a new filter (3). Securely tighten bowl (2) to filter (3).
Install filter (3) in filter base (4). Securely tighten filter (3) to filter base (4). Note: Do not start the engine until all service to the fuel system is complete. For instructions about priming the fuel system, refer to Operation and Maintenance Manual, "Fuel System - Prime".
Close the access door.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
SE60 V XW, SE60 VT XW Vibratory Screed JS900001-UP
AP1055 F Asphalt Paver TJ500001-UP (MACHINE) POWERED BY C7.1 Engine
AP1000 F Asphalt Paver AC400001-UP (MACHINE) POWERED BY C7.1 Engine
AP1055 F Asphalt Paver RLM00001-UP (MACHINE) POWERED BY C7.1 Engine
AP655F & AP600F Asphalt Paver 65500001-UP (MACHINE) POWERED BY C4.4 Engine
AP600F, AP655F Asphalt Paver LR600001-UP (MACHINE) POWERED BY C7.1 Engine
AP655F Asphalt Paver 45200001-UP (MACHINE) POWERED BY C4.4 Engine
AP655F Asphalt Paver 47900001-UP (MACHINE) POWERED BY C7.1 Engine
AP655F L Asphalt Paver AC600001-UP (MACHINE) POWERED BY C7.1 Engine
SE50 VT, SE60 VT XW Asphalt Screed B8600001-UP
AP600F Asphalt Paver JA600001-UP (MACHINE) POWERED BY C7.1 Engine
AP600F Asphalt Paver D6F00001-UP (MACHINE) POWERED BY C4.4 Engine


Parts lines Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.