LINES GP-FUEL FILTER 4263312 - Caterpillar

AC Overview (2) - The "AC OVERVIEW" key will navigate the display to the first screen of AC information. The "AC OVERVIEW" information contains various AC parameters that summarize the electrical operation of the generator set.Engine Overview (3) - The "ENGINE OVERVIEW" key will navigate the display to the first screen of engine information. The "ENGINE OVERVIEW" information contains various engine parameters that summarize the operation of the generator set.Main Menu Key (4) - The "MAIN MENU"key will navigate the display to the main menu directly without having to navigate out of menus.Emergency Stop Button (E-Stop) (5) - Immediately stops the engine and removes power from the ECM.Left Key (6) - The "LEFT" key is used during set point adjustment. The "LEFT" key is used to select the digit that is edited during the entry of numeric data. The "LEFT" key is also used during some of the set point adjustments to select a check box. The key is also used to unselect a check box. If a check box has a check mark, pressing the "LEFT" key will disable the function. Pressing the key will also remove the check mark. Pressing the "LEFT" key will also cause the check mark to disappear. If the check box does not have a check mark, pressing the "LEFT" key will enable the function. Pressing the "LEFT" key will also cause a check mark to appear.Down Key (7) - The "DOWN" key is used to navigate downward through the various menus or screens. The "DOWN" key is also used to program the set points. The "DOWN" key is used to decrease the digits when entering numeric data. If the set point requires selection from a list, the "DOWN" key is used to navigate DOWN through the list.Enter Key (8) - The "ENTER" key is used to navigate through the menus. When the key is pressed, the user moves forward or the user moves downward through the menus. The "ENTER" key is also used to save any changes when the set points are being programmed. Pressing the "OK" key during programming the set points causes the changes to be saved to memory.Right Key (9) - The "RIGHT" key is used during set point adjustment. The "RIGHT" key is used to select which digit is edited when entering numeric data. The "RIGHT" key is also used during some set point adjustments to select or to unselect a check box. If a check box has a check mark, the function has been enabled. Pressing the "RIGHT" key will disable the function. Pressing the "RIGHT" key will also cause the check mark to disappear. If the check box does not have a check mark, the function is disabled. Pressing the "RIGHT" key will enable the function. Pressing the "RIGHT" key will also cause a check mark to appear.Up Key (10) - The "UP" key is used to navigate through the various menus and monitoring screens. The "UP" key is also used when a set point