LINES GP-WATER 4406127 - Caterpillar

Illustration 6 g02814596
Route the ring end on the 356-6115 Work Tool Harness As (6) through the wall grommet (K). Remove the nut (J) on the ground stud and insert the ring end. Reinstall the nut.
Install the 263-5418 Rocker Switch (5) per steps 6.a through 6.g.
Illustration 7 g02814219
(E) 258-4007 Switch Cover (F) 258-4001 Panel (LH) (Arrows) Location of the Switch Cover release tabs.
Locate the 258-4007 Switch Cover (E) which is part of the 258-4001 Panel (LH) (F). Remove switch cover (E) from the control panel. Note: Switch cover (E) has provisions for four rocker switches. Use a thin blade screwdriver in order to release the locking tab (arrows) on one side of the switch cover. Withdraw the switch cover from the panel.Refer to Illustration 7.
Illustration 8 g02814256
(5) 263-5418 Rocker Switch (E) 258-4007 Switch Cover (G) Location for the 263-5418 Rocker Switch
Remove the 109-2356 Plug from Location G in the switch cover. Refer to Illustration 8.Note: Remove the plug by pushing the plug from the back of the switch cover.
Install the 263-5417 Rocker Switch (5) in the 258-4007 Switch Cover (E) at Location G. Note: Install the rocker switch by pushing the rocker switch into the opening in the switch cover. Insert the rocker switch from the front of the switch cover. Push the rocker switch until the locking tabs on the rocker switch are engaged.
Illustration 9 g02814356
(H) L-C8 Harness Connector of the 356-6087 Harness As (F) 258-4001 Panel (LH)
Locate harness connector L-C8 (H) on the 356-6087 Harness As that is inside the 258-4001 Panel (LH) (F) .Refer to Illustration 9.
Ensure that the configuration of the L-C8 harness connector matches the configuration in Table 3.
Table 3
Harness Connector L-C8    
Position     Color     Description    
1     N/A     N/A    
2     Pink     190-L108    
3     Pink     A572-L119    
4     N/A     N/A    
5     N/A     N/A    
6     N/A     N/A    
7     Black     200-L91    
8     Purple     614-L114    
9     N/A     N/A    
10     N/A     N/A    
Illustration 10 g02814416
(5) 263-5418 Rocker Switch (E) 258-4007 Switch Cover (F) 258-4001 Panel (LH)
Connect the L-C8 harness connector (H (not shown)) to the back of the 263-5417 Rocker Switch (5) .
Reinstall the 258-4007 Switch Cover (E) into the 258-4001 Panel (LH) (F) .
Illustration 11 g02814418
(2) Five 146-9439 Relay As (R1 - R5) Locations for installing the five 146-9439 Relay As
Install the five 146-9439 Relay As (2) into positions R1 through R5 of the upper fuse panel.Refer to Illustration 11.