LINES GP-WATER 4743237 - Caterpillar

Illustration 2 g03775837
451-9080 Front Lines Gp Installation Procedure
Illustration 3 g03775838
Valve assembly (A) (8) 340-3327 Control Valve Gp (10) 451-9079 Support As (12) 148-8325 Connector As (13) 148-8336 Connector As (16) 164-5546 Tee As (18) 6V-0852 Dust Cap (19) 8T-4223 Hard Washer (20) 8T-4224 Hard Washer (21) 8T-4244 Nut (22) 8T-4910 Bolt (23) 8T-6870 Bolt
Assemble the control valve onto the support assembly.
Install the connectors into the ports.
Illustration 4 g03775839
(2) 4I-9521 Marker Band (Red) (3) 4I-9522 Marker Band (Yellow) (4) 4I-9525 Marker Band (Orange) (5) 7K-1181 Cable Strap (6) 123-4750 Check Valve As (7) 275-1672 Hose As (9) 358-7558 Hose As (16) 164-5546 Tee As (17) 164-5567 Quick Disconnect Coupler As (18) 6V-0852 Dust Cap
Install valve assembly (A) into the pump compartment.
Install hose (9) to port "P" of valve assembly (A) and port "M2" of the main pump.
Install hose (7) with the red marker bands into port "A" of valve assembly (A) .
Install hose (7) with the yellow marker bands into port "B" of valve assembly (A) .
Route both hoses (7) through the frame toward the boom.
Illustration 5 g03775840
(1) 4I-0995 Hose As (3) 4I-9522 Marker Band (Yellow) (11) 148-8318 Connector As (14) 148-8415 Reducer As (15) 148-8428 Tee As
Attach hose (1) to port "T" of valve assembly (A) .
Connect hose (1) to the hydraulic tank.Note: Reducer (14) and tee (15) are for use when necessary to connect to the tank lines group.
Illustration 6 g03776418
(2) 4I-9521 Marker Band (Red) (3) 4I-9522 Marker Band (Yellow) (5) 7K-1181 Cable Strap (7) 275-1672 Hose As
Attach hose (7) to the attachment lines on the boom.