LINES GP-PILOT 4846975 - Caterpillar

Removal Procedure
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Disconnect batteries.
Illustration 1 g03784593
Disconnect ground strap (1), cable assemblies (2), and cable assemblies (3).
Illustration 2 g03784599
Remove bolts (5) and electric starting motor (4). Installation Procedure
Install electric starting motor (4) in the reverse order of removal.
Illustration 3 g03784645
Tighten bolts (5) to a torque of 215 40 N m (159 30 lb ft).
Tighten nuts (6) to a torque of 26 4 N m (230 35 lb in).