LINES GP-FUEL INJECTION 4P6018 - Caterpillar

TYPE="1" START="1">
Park on a level surface. If you must park on a grade, block the machine.
Apply the service brake in order to stop the machine. Move the transmission direction selector to the NEUTRAL position. Use the throttle control to reduce the engine speed to low idle. Engage the parking brake.
Lower all implements to the ground.
Stop the engine by turning the engine start switch key to the OFF position. Remove the key.
Turn the key for the battery disconnect switch to the OFF position. Remove the key when you exit the machine for extended time periods.
When you dismount, use the steps and the handholds. Use both hands and face the machine.
Inspect the engine compartment for debris. Clean out any debris and paper in order to avoid a fire.
Install all the vandalism protection covers and install all the locks. Padlocks are provided for the following areas:
Engine Access Doors
Radiator Cap
Engine Oil Filler Cap
Battery Box
Compartment for Washer Fluid Bottle
Fuel Cap
Fuel Drain
Hydraulic Oil Tank Filler Cap
Access Cover for Filter Compartment
Lock the cab doors and the windows, if equipped.