LINES GP-FUEL INJECTION 4P9631 - Caterpillar

Table 1
Specification for 364-9710 Transmission Case Gp
Item Qty Part Specification Description
1 2 375-6127 D-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
2 2 375-6128 D-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
3 - 8C-8422 Sealant Before assembly, the surface must be free of oil and other contaminates.
Apply blue LoctiteTM High Flex GM to the surface.
4 2 418-7810 U-Cup Seal Lubricate the bore lightly with the lubricant that is being sealed.
Illustration 2 g03687595
Rear view
Table 2
Item Qty Part Specification Description
5 - - Apply white Loctite Breakloose PST to the threads.
6 1 138-1509 Ecology Drain Gp Torque to 100 10 N m (74 7 lb ft).
7 1 341-0100 Plug As Torque to 79 7 N m (58 5 lb ft).
8 1 326-0320 Plug As Torque to 389 50 N m (287 37 lb ft).
Illustration 3 g03687596
Left side view
Table 3
Item Qty Part Specification Description
9 5 8T-0226 Bolt Torque to 170 30 N m (125 22 lb ft).
Illustration 4 g03687597
Section E-E
Table 4
Item Qty Part Specification Description
10 2 346-6296 Plug Torque to 240 40 N m (177 30 lb ft)
11 2 373-2978 Detent Pin Torque to 28 3 N m (248 27 lb in).
Illustration 5 g03687678
Front view
Table 5
Item Qty Part Specification Description
12 2 193-2200 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
13 1 358-5287 Shim Pack As required, use the following shims to obtain end ply 0.07 0.03 mm (0.003 0.001 inch).
Total thickness is 2.11 mm (0.083 inch).