LINES GP-TURBOCHARGER OIL 5022907 - Caterpillar

Illustration 1 g03240076
Table 1
Specification for 381-1954 Camshaft Gp
Item Qty Part Specification Description
A - - Dimension of groove in a new camshaft assembly for the thrust washer is 8.75 0.05 mm (0.344 0.002 inch).
B 2 5B-5821 Dowel Extension of the dowel from the camshaft assembly is 12.0 0.5 mm (0.47 0.02 inch).
C 2 7N-3218 Thrust Washer Thickness of a new thrust washer is 8.50 0.05 mm (0.335 0.002 inch).
D - - Diameter of the bearing journal is 91.88 0.02 mm (3.617 0.001 inch).
Illustration 2 g03240096
Table 2
Item Qty Part Specification Description
- - - Use the following procedure in order to determine the actual camshaft lobe lift (E):
1. Measure camshaft lobe height (F).
2. Measure base circle (G).
3. Subtract the base circle (G) from the camshaft lobe height (F). The difference is the actual camshaft lobe lift.
E - - Specified camshaft lobe lift for
Inlet lobe is 13.25 mm (0.522 inch).
Injector lobe is 13.807 mm (0.5436 inch).
Exhaust lobe is 13.25 mm (0.522 inch).