AVSPARE.COM
parts catalog

LINES GP-PUMP 5087687 - Caterpillar



5087687 LINES GP-PUMP Caterpillar parts LINES
Rating:
36
Alternative (cross code) number:
CA5087687
508-7687
5087687
Caterpillar 5087687 LINES GP-PUMP

Buy LINES GP-PUMP 5087687 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:
 
  For full view, you need register

Information:

Removal Procedure
Wear goggles, gloves, protective clothing, and a National Institute for Occupational Safety and Health (NIOSH) approved P95 or N95 half-face respirator when handling a used Diesel Particulate Filter or Catalytic Converter Muffler. Failure to do so could result in personal injury.
The muffler, catalytic converter/muffler, and diesel particulate filter will become extremely hot during engine operation. A hot muffler, catalytic converter/muffler and diesel particulate filter can cause serious burns. Allow adequate cooling time before working on or near the muffler, catalytic converter/muffler and diesel particulate filter.
Do not strike any part of the assembly of the Diesel Particulate Filter (DPF). Do not allow any object to contact the internal element of the DPF. If the internal element of the DPF becomes damaged, the assembly must be replaced.Do not use power tools in order to disassemble or assemble any part of the Diesel Oxidation Catalyst (DOC), Diesel Particulate Filter (DPF), or the outlet section.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03344436
Remove banjo bolt (2) from the tube assembly and diesel particulate filter canister (1).
Remove sealing washers (3) (not shown).
Remove banjo bolt (4) from the tube assembly and diesel particulate filter canister (1).
Remove sealing washers (5) (not shown).
Remove catalyst inlet temperature sensor (6) from diesel particulate filter canister (1). Refer to Disassembly and Assembly, "Temperature Sensor (Catalyst Inlet) - Remove and Install" for the correct procedure.
Remove inlet temperature sensor (7) from diesel particulate filter canister (1). Refer to Disassembly and Assembly, "Temperature Sensor (DPF) - Remove and Install" for the correct procedure.
Remove outlet temperature sensor (8) from diesel particulate filter canister (1). Refer to Disassembly and Assembly, "Temperature Sensor (DPF) - Remove and Install" for the correct procedure.
Illustration 2 g03344437
Remove the nuts and bolts (15) and nuts (12) from exhaust elbow (14).
Remove the nuts and bolt (10) and nuts and bolt (16). Remove bracket (9) from the diesel particulate filter canister (1).
Remove the nuts and bolt (11) and nuts and bolt (18). Remove bracket (17) from the diesel particulate filter canister (1).
Remove diesel particulate filter canister (1) from mounting bracket (19).
Remove gasket (13) (not shown).
Illustration 3 g03344438
If necessary, follow Step 13.a through Step 13.f in order to disassembly diesel particulate filter canister (1).
Make temporary marks on diesel particulate filter canister (1) for assembly purposes.
Remove nuts (26) and bolts (21).
Remove end cap (20) from diesel particulate filter canister (1).
Remove gasket (22).
Remove diesel particulate filter (23) from canister (27).
Remove gasket (24).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
TH255C Telehandler JK201000-UP (MACHINE) POWERED BY 2.9 Engine


Parts lines Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.