LINES GP-PILOT 6I6711 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Dial Indicator 1
- Magnetic Base and Stand 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that bushing is free from wear or damage. Refer to Specifications, "Engine Oil Pump" for more information. If necessary, replace the bushing.
Illustration 1 g02986456
Ensure that engine oil pump (2) is clean and free from wear or damage. Refer to Specifications, "Engine Oil Pump" for more information. If necessary, replace the engine oil pump.
Lubricate the rotors of the engine oil pump (2) with clean engine oil.
Align engine oil pump gear (3) with crankshaft gear (4). Install the engine oil pump to the cylinder block.
Install bolts (1). Tighten the bolts to a torque of 11 N m (97 lb in).
Use Tooling (A) to check the backlash between oil pump gear (3) and crankshaft gear (4). Ensure that the backlash is within specified values. Refer to Specifications, "Gear Group (Front)" for further information. End By:
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove and Install".