LINES GP-FUEL FILTER 6N7722 - Caterpillar

Horn (12) - Press the lower button on the left joystick in order to activate the horn.
Grapple Rotate Clockwise (13) - Move the variable control switch (13) on the left joystick upward in order to rotate the grapple clockwise.
Grapple Rotate Counterclockwise (13) - Move the variable control switch (13) on the left joystick downward in order to rotate the grapple counterclockwise.
AEC Switch (14) - Press the lower button on the right joystick in order to activate low engine speed. Press the button again in order to activate high engine speed.Magnet Joysticks
Before operating the magnet, make sure that the grapple/magnet switch is in the MAGNET position.Refer to Operation and Maintenance Manual, "Operator Controls" for more information on the grapple/magnet switch.Note: In order for the magnet to operate correctly, the position of the switch and the selection of the work tool in the monitoring system should match. Verify that the correct work tool is selected in the monitoring system. Refer to Operation and Maintenance Manual, "Monitoring System" and Operation and Maintenance Manual, "Magnet Operation".The machine control pattern can be varied by changing the hydraulic hose connections. Consult your Caterpillar dealer for the procedure.
Illustration 3 g01221770
SAE pattern
The machine control pattern is initially set at the factory to the SAE system, as shown. The pattern on the left pertains to the left joystick and the pattern on the right pertains to the right joystick.
Stick Out (1) - Move the joystick to this position in order to move the stick outward.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the joystick to this position in order to lower the boom.
Boom Raise (7) - Move the joystick to this position in order to raise the boom.HOLD (9) - When you release the joysticks from any position, the joysticks will return to the HOLD position. Movement of the upper structure will stop.Two functions may be performed at the same time by moving a joystick diagonally.
Illustration 4 g01267080
(10) Left Joystick
(11) Right Joystick
Horn (12) - Press the lower switch on the top of the left joystick in order to activate the horn.
AEC Switch (14) - Press the lower switch on the top of the right joystick in order to activate low engine speed. Press the switch again in order to activate high engine speed.
Magnet ON (15) - Press switch (15) on the front of the right joystick in order to turn on the magnet.
Magnet OFF (16) - Press switch (16) on the front of the left joystick in order to turn off the magnet.