LINES G-ENGINE 7W0893 - Caterpillar

Illustration 2 g00645045
Illustration 3 g00645047
Loosen clamp (7) and disconnect hose (8) from the primary fuel filter.
Slide boot (9) away from nut (12) .
Remove nut (12), the washer and cable assemblies (10), (13), and (11) .
Illustration 4 g00645049
Remove nut (16), cable (14), cable (17), wire (19), wire (18) and wire (15) .
Illustration 5 g00645051
Remove three cable straps (20) .
Illustration 6 g00645053
Loosen clamp (22). Remove hose (23), elbow (21) and the clamps.
Illustration 7 g00645056
Disconnect electrical connector (25). Remove cable strap (24) .
Illustration 8 g00645059
Disconnect two electrical connector (26) and (27) .
Illustration 9 g00645061
Remove four bolts (28), the washers, and half flanges (30). Disconnect hose assembly (29). Remove the O-ring seal from hose assembly (29) .
Illustration 10 g00645064
Remove bolt (32) and the washer.
Disconnect two slotted clips (31). Remove two clips (36). Remove two grommets (33) from hose assemblies (34) and (35) .
Reposition the hose assemblies out of the way.
Illustration 11 g00645069
Disconnect electrical connector (38) from pump (37) .
Illustration 12 g00645071
Remove four bolts (41), the four washers, and two half flanges (42) .
Disconnect hose assembly (39). Remove the O-ring seal.
Disconnect hose assembly (40). Remove the O-ring seal.
Illustration 13 g00645073
Remove four bolts (44), the four washers, and two half flanges (46) .
Disconnect hose assembly (43) from torque divider (45). Remove the O-ring seal from hose assembly (43) .
Illustration 14 g00645077
Use Tooling (A) and a suitable lifting device to support engine (47) and the torque divider.
Illustration 15 g00645078
Remove four bolts (49), the four washers, and two mounting caps (48) .
Remove two bolts (50) and the two washers.
Remove the engine and the torque divider. The weight of the engine and the torque divider is 1500 kg (3307 lb).
Remove support (52) and mount assembly (51) .