LINES GP-FUEL INJECTION 7W9744 - Caterpillar

No clearance for person in this area when machine turns. Severe injury or death from crushing could occur.
The steering frame lock must be kept in the stowed position during normal machine operation.Do not remove the steering frame lock from the machine. The steering frame lock must be available for use at all times.The steering frame lock must be installed before anyone enters the area around the oscillating hitch.
Park the machine on a level surface in the straight ahead position.
Move the transmission control to the P position, which will engage the parking brake, and shut off the engine.
Illustration 1 g03725488
Steering frame lock in the stowed position
Remove the steering frame lock from the stowed position.
Illustration 2 g02816300
Steering frame lock in the installed position
Install the steering frame lock and the two bolts onto the rod of each steering cylinder.Personnel may now enter the area around the oscillating hitch.Each steering frame lock must be in the stowed position before you operate the machine.
Before you return each steering frame lock to the stowed position, check that the parking brake is engaged. Do not start the engine until each steering frame lock is the stowed position and all personnel are clear.
Remove the two bolts and the steering frame lock from the rod of each steering cylinder.
Inspect the steering frame lock. A damaged steering frame lock may not be capable of withstanding the steering forces that can be generated. If the steering frame lock has any of the following damage replace the steering frame lock:
Bent
Twisted
Permanent Deformation
Stow one steering frame lock on either side of the rear frame.