LINES GP-AFTERCOOLER WATER 8N2304 - Caterpillar

Illustration 1 g00863714
(1) Lubricate the face and the threads with lubricant prior to assembly. Torque for locknut ... 8000 400 N m (5900 295 lb ft) (2) Lubricate the inner diameter and the outer diameter with clean grease. (3) Rod assembly Outside diameter ... 104.93 .03 mm (4.1311 0.0012 inch) Minimum thickness for plating ... 0.025 + 0.100/-0.006 mm (0.0010 + 0.0039/-0.0002 inch) (4) Bore of cylinder ... 150 .10 mm (5.9055 0.0039 inch) (5) Bore of cylinder head ... 105.73 .03 mm (4.1626 0.0012 inch) (6) Two 186-5477 Sleeve Bearings Outside diameter ... 95.102 0.011 mm (3.7442 0.0004 inch) Inside diameter ... 80.250 0.020 mm (3.1594 0.0008 inch) Install the bearing in the bearing bore. ... 7.50 0.30 mm (0.295 0.012 inch) (7) Free linear movement of the stop after assembly ... 0.50 0.26 mm (0.020 0.010 inch) (8) Maximum outside diameter of the ring after assembly ... 70.4 mm (2.77 inch) (9) Install the seal ring with the groove toward the piston. (10) Lubricate the sealing lip slightly with the lubricant that is being sealed. (11) Apply 7M-7456 Bearing Mount Compound to the wiper seal groove prior to assembly.