LINES GP-FUEL INJECTION 8N8170 - Caterpillar

Illustration 1. Components of FT1783 Drill Fixture.To use the FT1783 Drill Fixture, put the impeller in position on the plate. A vane of the impeller must be against the locator. See Illustration 2. Use the T-bar to hold the impeller in position. The drill fixture and impeller can then be put in position in a vise as shown in Illustration 3. Use a level to make sure the plate is perpendicular to the drill. Use the two holes in the fixture as guides, when 6.35 mm (.250") Ø holes are drilled.
Drawings of the FT1783 Drill Fixture are available from your Division Service Manager.
Illustration 2. Correct position of impeller in the drill fixture.
Illustration 3. Drill fixture in position in a vise.