LINES GP-FRONT 9C2373 - Caterpillar

1. Loosen screws (1) and put panel assembly (2) in the "OPEN" position. 2. Remove bolts (3) and disconnect plate assembly (4). 3. Put identification marks on all wires (8) for correct assembly. Disconnect wires (8) from the circuit breakers and, if necessary, from switch assembly (magnetic) (6).4. Remove nuts (5), the screws and circuit breakers (7) from the plate assembly.5. If necessary, remove the bolts and switch assembly (magnetic) (6) from the plate assembly.Install Circuit Breakers
1. Put switch assembly (magnetic) (2) in position on the plate assembly and install the bolts that hold it.2. Put circuit breakers (1) in position on the plate assembly and install the screws and nuts (3) that hold them.3. Connect wires (4) to the circuit breakers and the switch assembly (magnetic). 4. Put plate assembly (5) in position and install the bolts that hold it. 5. Put panel assembly (7) in the "CLOSED" position and tighten screws (6).