LINES GP-PILOT 9U4730 - Caterpillar

Illustration 2 g01102869
Remove the bolts that secure bearing cage (4) to the transfer gear case. Use Tooling (F) in order to separate bearing cage (4) from the transfer gear case.
Remove bearing cage (4), shims (5), and gear (6) from the transfer gear case.
Illustration 3 g00529211
Remove bearing cups (7) and (8) from the transfer gear case. Attach Tooling (A) and a suitable lifting device onto the transfer gear case. The weight of the transfer gear case is approximately 340 kg (750 lb). Turn over the transfer gear case. Remove Tooling (A).
Illustration 4 g01102873
Remove the bolts that secure bearing cage (9) to the transfer gear case. Use Tooling (F) in order to separate bearing cage (9) from the transfer gear case.
Remove bearing cage (9), shims (10), and gear (11) from the transfer gear case.
Illustration 5 g00529214
Remove bearing cup (12) from the transfer gear case. Attach Tooling (A) and a suitable lifting device onto the transfer gear case. Turn over the transfer gear case.
Illustration 6 g00529215
Remove bolts (13) that secure bearing cage (14) to the transfer gear case. If necessary, rotate the gear until the three threaded holes are visible in bearing cage (14). Install Tooling (F) through gear (15) and into bearing cage (14). Tighten Tooling (F) evenly until bearing cage (14) and gear (15) separate from the transfer gear case. Remove bearing cage (14) and gear (15) as a unit from the transfer gear case.
Illustration 7 g00529216
Illustration 8 g00529257
Remove retaining ring (16) from gear (15). Remove bearing (17) and bearing cage (14) from gear (15).
Illustration 9 g01048544
Remove bearing (17) from bearing cage (14).
Illustration 10 g01048548
Remove bolts (19) and separate gear (20) from gear (11). Use Tooling (B) to remove bearing cone (18) from gear (11). Repeat the procedure for the bearing cone on the opposite side of the gear.
Illustration 11 g01048549
Use Tooling (C) to remove bearing cone (21) from gear (6). Repeat the procedure for the bearing cone on the opposite side of gear (6).
Illustration 12 g01048550
Use Tooling (C) to remove bearing cone (22) from gear (3). Repeat the procedure for the bearing cone on the opposite side of gear (3).
Illustration 13 g01048551
Use Tooling (D) to remove bearing cup (23) from bearing cage (4). Remove O-ring seal (24) from bearing cage (4).
Illustration 14 g01048553
Remove bearing cup (25) from bearing cage (9).
Illustration 15 g01048552
Use Tooling (E) to remove bearing cup (26) from bearing cage (1). Remove O-ring seal (27) from bearing cage (1).