LINES GP-AIR 9Y1364 - Caterpillar

Preparing to Use Lift Forks
Illustration 1 g00287655
Remove pin assembly (1) from pin assembly (2) behind the bucket.
Remove the pin assembly (2) that is holding the fork in the storage position.
Illustration 2 g00287656
Remove the pin (3) .
Flip the fork over the bucket.
Reinstall the pin (3) in order to secure the fork in place.Repeat the procedure for the other fork.Using Forks to Move a Load
When you are using forks, make sure that the load is centered. Lift the load carefully off the ground. Tilt the load backward in order to cradle the load.Travel with the load as low as possible, while you are still maintaining ground clearance.Do not open the bowl of the multipurpose clam bucket when you are using the forks to carry loads.Tilt the load forward ONLY when you are directly over the unloading area.Deposit the load and back away carefully in order to disengage the forks.