LINING CAM 2U0036 - Caterpillar

Illustration 1 g01262951
Note: The drive shaft yokes must be installed in the in-phase position, as shown. (1) Torque for eight bolts ... 530 70 N m (390 50 lb ft) (2) Torque for eight bolts ... 530 70 N m (390 50 lb ft) (3) Torque for eight bolts ... 530 70 N m (390 50 lb ft) (4) Torque for eight bolts ... 530 70 N m (390 50 lb ft) (5) Torque for four bolts ... 530 70 N m (390 50 lb ft) (6) Torque for four bolts ... 530 70 N m (390 50 lb ft) (7) Torque for the bolt ... 530 70 N m (390 50 lb ft) (8) Torque for the bolt ... 570 80 N m (420 60 lb ft) (9) Lubricate the spline when the machine is fully articulated. Use molybdenum grease to lubricate the spine. (10) Lubricate the seal lip with a minimal amount of lithium grease prior to assembly.
Illustration 2 g00668947
Typical Universal JointNote: Tighten the bolts that retain the universal joints in the numerical sequence that is shown in illustration 2.