LINING 3J3065 - Caterpillar

Illustration 5 g01294002
Engine Serial Number ____________________The serial number plate of the bulldozer is located on the back of the blade.
Illustration 6 g01213738
Illustration 7 g01057098
Bulldozer Serial Number ____________________The serial number plate for the ripper is located on the side of the ripper.
Illustration 8 g01209617
Illustration 9 g01057104
Ripper Serial Number ____________________The serial number plate for the winch is located on the side of the winch.
Illustration 10 g01209622
Illustration 11 g01323812
Winch Serial Number ____________________Certifications
ROPS/FOPS Plate (5)
The message is positioned on the outside left canopy.
Illustration 12 g01952494
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without payload, should not exceed the mass on the certification plate.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information. Sound Certification
Illustration 13 g00933634
A typical example of this film is shown. Your machine may have a different value.If equipped, the certification film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound power level. The guaranteed sound power level is measured at the time of manufacture. The guaranteed sound power level is measured according to the conditions that are specified in "2000/14/EC".European Union
This plate is positioned on the bottom left side of the Machine PIN (1) .
Illustration 14 g01883459
For quick reference, record this information in the spaces that are provided below.
Engine Power of primary engine (kW)____________________
Engine Power for additional engine (kW) (if equipped) ____________________
Typical operating weight of machine for European market (kg)____________________
Year of construction____________________
Machine Type____________________For machines that are compliant to "1998/37/EC", the following information is stamped onto the "CE" plate.
Illustration 15 g01062968
For quick reference, record this information in the spaces that are provided below.
Engine Power of primary engine (kW)____________________
Typical operating weight of machine for European market (kg)____________________
Year____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.