LINK A-DRAG 0387164 - Caterpillar

Product Identification Number (PIN)
Illustration 1 g00996995
Left side of front frameMachine PIN ____________________Year of Manufacture____________________European Union
Note: The CE plate is on machines that are certified to the valid European Union requirements at that time. If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. The CE plate is positioned on the bottom left side of the plate for the PIN. For machines compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.
Illustration 2 g01883459
Engine Power primary engine (kW)
Engine Power for additional engine if equipped (kW)
Typical machine operating weight for European market (kg)
Year of construction
Machine TypeFor the name, the address and the country of origin for the manufacturer, see the PIN plate.For machines compliant to "1998/37/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.
Illustration 3 g01062968
Engine Power primary engine (kW)____________________
Typical machine operating weight for European market (kg)____________________
Year ____________________Serial Number
Caterpillar products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers. For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Illustration 4 g00997052
Rear view of the torque converter housingTorque Converter Serial Number ____________________
Illustration 5 g01000186
Engine valve coverEngine Serial Number ____________________
Illustration 6 g00838375
Right side of planetary caseTransmission Serial Number____________________Certification
Sound
Illustration 7 g00933634
Typical exampleIf equipped, the film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound level. The guaranteed sound level is measured at the time of manufacture. Refer to Operation and Maintenance Manual, "Sound Information and Vibration Information" for the guaranteed sound level for your machine.ROPS/FOPS Film
Illustration 8 g00944234
This warning film is located on the outside of the cab on the left side below the window. This machine has been certified to the standards that are listed on the certification label. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification label.